Continous Futures Contracts with Back-Adjustment

Currently the contract roll-over for US indices contracts from Sep-23 to Dec-23 takes place. The price difference between both expiration months is quite high as shown in the following table: The already available continuous contracts in ATAS (with prefix #) link these contracts after the first day of higher volume in the new contract, i.e. after closing of 11/09/2023. This un-adjusted chaining of contracts leads to a big price gap which corrupts any charts of the #-contracts,I.e. any (Volume-) or Pivot-Level Analysis in #-contract is currently totally misleading in my opinion. (left: Z3 contract, right: Cont. contract) Proposal: Introduction of a second version of continuous contracts (e.g. with prefix +) with difference-adjusted historical prices for the old contracts as it is available in other charting platforms (SierraCharts, MotiveWave, NinjaTrader). The best possibility would be -in my opinion- to use the price difference of the daily mid-prices of the last active day of the old contract. In the table above this would be for ES: ((4543,50+4508,75,25)/2) - (4493,50+4459,25)/2 = 49,75 (rounded to the nearest tick if necessary). This means all historical data until EoD 11/09/2023 should be increased by 49,75 points in order to adjust the price gap to the December contract. This process would be necessary for each roll-over historically and in the future. I assume it should be easier to process this on the data servers of ATAS, this would avoid any programming work in the client software.

Creation of connection with TRADOVATE

Hi, good morning!!! I have been an Atas user for more than 1 and a half years with the purchase of the lifetime platform, I see a problem in not being able to have a connection WITH ATAS WITH MY TRADOVATE ACCOUNT AND HAVING THE NINJATRADER PLATFORM INSTALLED EXCLUSIVELY FOR TRADOVATE, I would like it to have this type of connection. This message is especially for ATAS developers and programmers to IMPLEMENT THIS TYPE OF CONNECTION. I would be very grateful, I and MANY CUSTOMERS are waiting for this type of connection. Thank you. A cordial greeting and good day.

Ability to add Breakeven and Trailing for Multi-Level Strategy Settings

I would like the ability to be able to set the Breakeven and Trailing feature on the Multi-level strategy. Similar how it is set on the Simple strategy currently. Ideally when you have multiple quantities and you are closing partials, I would like the ability for the remaining quantities to be set to breakeven automatically or even trailing at a certain level. Please seen screen capture for details.

Delta bubble

Hello can we have delta bubble like Bookmap on the chart, candle chart and heatmap? it can be very useful tool for traders in my opinion, thanks.

Add "Open Interest" cluster mode // Add "Open Interest" cluster mode

Hello dear forum members and ATAS developers. Please implement a simple task, add a display mode in clusters as "Open Interest", noticed this feature in the platform TigerTrade.. This mode allows you to see where market participants were most active, building up positions or dropping them. The difference from the volume cluster is that the volume cluster is the traded contracts (lots, etc.), while the cluster chart in the "Open Interest" mode allows us to see where and exactly where the volume was traded - it is a retest / breakdown of the level, liquidity capture (traps). Please support and implement this mode, thank you!. Hello dear forum participants and ATAS developers. I ask you to implement a simple task, to add a display mode in clusters in the form of "Open Interest", I noticed this feature in the TigerTrade platform. This mode allows you to see in which place the market participants showed the greatest activity, increased positions or dumped. The difference from a volume cluster is that a volume cluster is traded contracts (lots, etc.), and the cluster chart in the "Open Interest" mode allows us to see where and where exactly this volume was traded - this is a level retest / breakout, liquidity capture (traps). Please support and implement this mode, thank you!

Triggers of partial position closing (take profit)

Dear developers! The current functionality of the platform related to order management is weak. After entering a position, in most cases the price hangs and can stay in place for several minutes, sometimes 20-30 minutes,  in the meantime, it is necessary to keep a close eye on what is happening, risking both to get a stop and to grab the opening of a position in the opposite direction if, for example, a stop loss (through a protective strategy) and a take part in the form of a partial fixing of the position by the opposite order are placed. The platform lacks the elementary possibility of setting triggers for partial fix of a position, which are canceled when a stop-loss is triggered, for example. The available OCO orders for the realization of such order management are ineffective, because the triggering of one OCO order completely cancels the stop-loss order, exposing the position to unjustified uncontrolled risk. Again we have to switch to the trading modules of Wolfix and NT, because ATAS does not have realized opportunities for normal order management,  allowing more or less adequately manage the risk without sitting in front of the monitor. Bearing in mind the above, I ask you to implement triggers for fixing the position in parts, as it is realized, for example, in Wolfix. Such triggers are programmatic and are not displayed on the exchange, but simply close a part of the position when the price reaches the level specified by the trigger marker on a user-defined volume on the market or through quick limiters (optional).

Plugin- / Appstore

ATAS has evolved into a market-leading software but still has some significant weaknesses. However, it is unreasonable to expect that all requirements, especially in niche areas, will be developed by in-house developers. Therefore, I propose that ATAS develops or releases a plugin interface to give developers the option to integrate their own software. Particularly interesting for ATAS could be its own app store, which can be monetized for both ATAS and developers (similar to MetaTrader). Background of my request is that I recently started writing essential statistics that are crucial for my work method. The limiting statistics in ATAS increase my workload by 300%. I was able to retrieve the data externally via Python and have obtained information from ATAS's temporary, CSV-like databases. At the same time, I extracted information from ATAS using optical methods (screenshots and text recognition), which are not made available to me. The entire process is necessary for me, but technically overly complex. I know several developers who are trying to bend ATAS to get reasonable data for their specific application. I think ATAS should take care of this need! As a first iteration, it would also be sufficient if ATAS releases a plugin interface to integrate own modules. I want to emphasize that it is not enough to place indicators on charts. I'm talking about modules that can be integrated into ATAS's main menu (Statistics, Newsfeeds, Community Tabs). Almost every trader is forced to resort to external tools or Excel. There are certainly smart minds who can solve these problems for the ATAS community. Especially important are the following event listeners (list not complete): Position and trade-related listeners (Open, Close, Change, Fill) Feed-related events (query historical data via the feed, e.g., highs and lows or indicator values within a period or at a specific time) Reading out account data (account balance, margin) Access to the program folder through the plugin (e.g., for synchronizing profiles) Action functions like opening a chart, starting a trade, drawing indicators

Combined strategy BREAKEVEN & TRAILING

Please combine your existing strategies für BREAKEVEN and TRAILING to a new option. By reaching the Breakeven incl. Offset, the stop is trailed depending on the parameters TrailingStep and TrailingStop

Automatic Exit Strategy with multiple targets and trailing stop

Hi ATAS team, I would love to have an ATM Strategy with multiple targets and trailing stops corresponding to each target (just like the Multiple SL&TP strategy available in v5.7.28.312 but with trailing option). Are there plans to implement this into future ATAS releases or can I develop such a strategy on my own if not? Is it possible to download a examples of the strategies implemented in ATAS like the indicators on GitHub for ATAS? That would be really awesome! Thanks in advance, YBE

Please include the MBO Data and VWAP in the DOM. It is an advantage to see where large orders from a major market participant are in the book.

Can We have delta divergence Indicator also?

hey can we have delta divergence or rsi divergence bars for any time frames? WHICH ALLOW US TO SEE DIVERGENCE IN ANY TIME FRAME

volume profile heatmap and draw peak and valley

It would be great to be able to set the volume profile to heatmap mode, as shown in the attached photo. But also to be able to detect peak years Valley automatically. As proposed by Sierra chart.

Editable Indicators in Atas (like Pinescript)

I think it would be a great idea to make indicators easily editable and importable by making them open source and having a script editor implemented in Atas (like pinescript for tradingview) so users can write their own indicators, or modify existing indicators and tweak them. Maybe also a good idea to make the language the same as pinescript so that you can import your own indicators (as Tradingview is the most popular and has the biggest custom indicator library) In addition it would also be nice to be able to create multiple templates for indicators, for example a template for dark mode where the line is white, and a template for white mode were the line is black.

Improve Dynamic Level indicators for Market profile

I am using the Dynamic Levels indicator, but I find it lacking the Market Profile (TPO) type. I hope it will be updated in the near future. Thank you.

TPO Singleprint visualization

There should be options how to visualize Singleprints. Maybe you could extend the setting swith parameters like: All Singleprints (as it is shown today in ATAS) Area (example see down below) Long Singleprint (example see down below) Short Singleprint (example see down below) Examples: 1.) As an area: 2.) As a Line: But there should be at least two options for short and long Singleprints: Short: Line should be plotted at the top of the Single Print area Long: Line should be plotted at the bottom of the Single Print area

Enhancing ATAS Trading Platform with Customizable Exit Strategies

Currently, users have to set up their exit strategies manually each time they want to use a different approach. I propose implementing a feature that allows users to create and store multiple types of exit strategies, which can then be easily accessed and applied via a dropdown menu. The primary goal of this feature is to streamline the trading process and improve efficiency for traders using the ATAS platform. Here are the key components and benefits of implementing this feature: Customizable Exit Strategies: Users should be able to define various exit strategies based on their trading preferences and risk tolerance. This could include stop-loss (SL) and take-profit (TP) levels, trailing stops, time-based exits, and more. Save and Manage Presets: Once a user creates an exit strategy, they should have the option to save it as a preset. These presets can be named and managed by the user for easy access later. Dropdown Menu Integration: Integrate a dropdown menu within the platform's order entry or trade management interface. This dropdown will list the saved exit strategy presets, allowing users to select and apply them to their trades effortlessly. Auto-populate SL/TP Fields: When a user selects a preset from the dropdown menu, the corresponding stop-loss and take-profit levels should automatically populate the respective fields in the order entry form. This reduces the chances of manual input errors and saves time during trade execution. Flexibility and Adaptability: Traders often use different exit strategies based on market conditions, asset volatility, and trading objectives. Providing this flexibility within the platform empowers users to adapt quickly to changing market dynamics without having to reconfigure settings repeatedly. Enhanced Trading Experience: By simplifying the process of applying exit strategies, traders can focus more on analyzing market trends and making informed trading decisions rather than spending time on repetitive setup tasks. Implementing this feature aligns with ATAS's commitment to delivering a user-friendly and efficient trading platform. It enhances the platform's functionality and caters to the diverse needs of traders across various asset classes and trading styles. I believe that integrating customizable exit strategy presets with auto-population capabilities will be well-received by ATAS users and contribute positively to their overall trading experience.

Dynamic Contract Size Calculation Based on Stop Loss Placement

Hi ATAS Team, I’d like to suggest a feature that would significantly improve trade management efficiency. The idea is to allow the platform to automatically calculate the number of contracts to trade based solely on the stop loss position I manually set on the chart. The calculation would be based on my predefined risk amount (in currency or percentage), and the system would adjust the position size dynamically as I move the stop level around before placing the order. This would be especially useful during fast market conditions, where manual size calculation slows down the execution. Ideally, the size would update in real time as the stop distance changes, until I hit the buy/sell button to place the trade. Let me know if this could be considered for a future update. I think many traders would benefit from it. Thanks for your great work!

Platform/marketplace for custom indicators and strategies.

Such a marketplace will help non-programmers to find an already ready indicator they need or to find an executor who has enough experience in creating indicators/strategies for ATAS client.

Add the ability to view PnL in Quick Ruler/measure based on the number of contracts selected in chart trader

Ability to view not only PnL/lot but also PnL based on the number of contracts selected in chart trader in the quick ruler (mouse middle click+drag)

Indicators with different timeframes on a single chart

On platforms such as ninja, it is possible to include an indicator using a different time frame. For example, you can include an EMA on a 2-minute chart whose timing or data series comes from a 15-minute chart. Is it possible to do this in ATAS? I have seen that it can be done for indicating vWAP, but not for other indicators. Thanks in advance

Create ATAS for MAC (OS X) / Create ATAS for MAC (OS X)

Mac is one of the most used systems and its reliability, is much higher than Windows, I think it would be great to be able to use ATAS natively in MAC OS In windows, the CPU consumption is very high, I think that by the way MAC would be more efficient. Thank you See also my other suggestion: https://support.orderflowtrading.ru/communities/1/topics/21856-session-level-with-parameters Mac is one of the most commonly used systems, and its reliability is much higher than Windows. I think it would be great to be able to use ATAS on MAC OS X. Windows CPU consumption is very high, I think by the way MAC would be more efficient. Thank you See also my other suggestion: https://support.orderflowtrading.ru/communities/1/topics/21856-session-level-with-parameters

Cross-trade instruments using the following manager module

It would be nice to have the option to cross-trade instruments using the copy trade module. For instance, if I long ES in the parent account, the child account will long MES with lot size according to the set ratio in the module. Or, for instance, if I long ES in the parent account, then the child account will short NQ etc. This one may be impossible to program reliably, but it would be amazing. It would be extremely convenient to have the ability to alternate executions across multiple accounts. For instance, if I want to scale into 10 contracts across 10 accounts instead of concentrating all of that risk into one account. Every time I add contracts on the parent account, it will cycle those executions through each child account. The first contract long will execute in one account, then the next contract gets executed in the next account and so on. When I scale out, it will scale out in each account sequentially. If I add 5 contracts, it will spread those 5 contracts out across 5 accounts.

Risk Management Module

A Risk Management Module to track and protect the traders account. A) In this module the user can set different PARAMETERS for each account. (Maybe in $ and/or in % based on Account size) For example: - Max Daily Loss Limit - Max Weekly Loss Limit - Max Trades a Day Limit - Account Balance Limit - Daily Profit Goal B) and IF a parameter/limit is reached the trader can choose an option to protect his account. For example: - Warning Alert (Setting to modify your alarm sound) - Lock Trading for XX minutes - Close ATAS - Custom Notification / Splash-screen C) The User can Protect the Risk Management Tool with a password if he wants to change the parameters. for example: if Daily Loss is reached and the user emotionally wants to set the Loss Limit higher the Module is protected by a password, this would be an additional protection for the account.

indicator settings backup

It would be nice if you could somehow save settings of indicators

30 Minute Period Option - Fixed Market Profile & TPO

Please, can you add the option to select the current 30-minute period in the existing Fixed Market Profile and TPO tool? Currently, you have some options, like Daily, Weekly, Monthly, Custom etc. but adding the 30-minute would be a great addition. Please see the picture on how I currently use it, but means we must update every 30 minutes.

Multiple symbols on the same chart

Overlay multiple symbols on the same chart for analysis. Spread trading. Technical Indicator for correlation between symbols. Trade simulation for backtesting.

Quick Stop Loss to Entry (Breakeven)

I've asked support and this is not currently available so was hoping it could be implemented. My trading style using LTF can sometimes mean I'm catching fast moves to TP1 and then out at entry. I use a multiple TP strategy to maximise profit if the move should breakout further. However, the problem I face is that moving my SL to entry to breakeven after TP1 can sometimes cause a loss as I'm not fast enough to move it manually. It would be great if the strategy was updated so that an option was added to allow upon hitting TP1 (using the Multiple SL &TP strategy) the SL would move to breakeven. This would allow for a true set and forget trade strategy. Failing this a hotkey to shift your SL to entry instantly would also help greatly improve the speed of making this change. Thanks, Charles

Show all drawings in all windows of a link group

There is only a global horizontal line which shows up in all Windows of a Workspace. It would be much better if there is the possiblity to enable that all drawing objects used in a a chart window of a linked group are displayed in all chart windows of the linked group. This is really a functionality I miss in ATAS compared to other trading programs.

ATAS as a simulator on historical data, with variable pass rates.

Would it be possible to make it possible to use ATAS as a simulator on historical data, with variable pass rates? Like Forexster.

Bybit Exchange

Can Bybit Exchange connector be added so we can use Atas to trade via API?